2022 January

2022 January
Search
The Club
The Club
Toys made Club Members as part of the Toy Challenge
Chris Farquhar
Chris Farquhar
My project is call Bread and Cheese, not sure why it's called that, except that it rhymes with two birds in a tree. The design came from the Scrollsaw Woodworking & Crafts magazine; Winter 2020 - issue 81; by: Fiona Kingdon. I made it out of Pine, using a 0/2 spiral blade, painted with Acrylic paints by my wife Linda.
David VanDewerker
David VanDewerker
Wolf and Butterflies
Denis Muras
Denis Muras
Cedar Creche and Chess Pieces
George Graves
George Graves
Candlestick and Bowl
Lon Kelley
Lon Kelley
Mesquite Table
Lon Kelley
Lon Kelley
Mesquite Table
Lon Kelley
Lon Kelley
Mesquite Table
Lon Kelley
Lon Kelley
Mesquite Table
Lon Kelley
Lon Kelley
Mesquite Table
Lon Kelley
Lon Kelley
Mesquite Table
Lon Kelley
Lon Kelley
Mesquite Table
Lon Kelley
Lon Kelley
Mesquite bowl
Mike Hardy
Mike Hardy
Commissioned stand in mahogany. The engraving is the first two measures of the Mozart Clarinet Concerto and was cut with a trim router. Finished with Waterlox.
Mike Hardy
Mike Hardy
Commissioned stand in mahogany. The engraving is the first two measures of the Mozart Clarinet Concerto and was cut with a trim router. Finished with Waterlox.
Mike Hardy
Mike Hardy
Music stand in cherry. The cutout is done with a scroll saw, a modelers rasp, and files. Finished with Waterlox,
Mike Hardy
Mike Hardy
Music stand in cherry. The cutout is done with a scroll saw, a modelers rasp, and files. Finished with Waterlox,
Mike Turner
Mike Turner
Sofa tables
Roy Quast
Roy Quast
Puzzle Fish and Deer
Steve Wavro
Steve Wavro
Steve Wavro brought in an Intarsia Moose, which was based on a design by Bruce Worthington. It is comprised of 50 individual pieces of Ebony, Maple, Poplar, Walnut, and Western Red Cedar and finished with 1 coat of Danish Oil and 4 coats of polycrylic.
Tom Paulley
Tom Paulley
The box is made from offcuts from a 3-D cutting board. The wood species are cherry, maple, walnut and purpleheart. I used a forstner bit to hog out most of the material, then used a chisel and router template bit to clean up the inside of the box. The lid is held in place by 3 pairs of rare earth magnets. The finish is Total Boat Halcyon, a water-based marine varnish that comes in a bag, not a can! Used two coats of Gloss, followed by one coat of Satin.
Tom Paulley
Tom Paulley
The box is made from offcuts from a 3-D cutting board. The wood species are cherry, maple, walnut and purpleheart. I used a forstner bit to hog out most of the material, then used a chisel and router template bit to clean up the inside of the box. The lid is held in place by 3 pairs of rare earth magnets. The finish is Total Boat Halcyon, a water-based marine varnish that comes in a bag, not a can! Used two coats of Gloss, followed by one coat of Satin.
Scroll to top