Vase of mesquite and ebony and globe of 2268 pieces of various woods
Metal cutting portable bandsaw
3 tier cake stand and plates of mesquite
Walnut and pecan wall cabinet. The cabinet is constructed with Krenov style dowel joinery and stopped dados for the shelves. The one small shelf, drawer fronts, and pulls are pecan. The back is ship lapped walnut. The drawers have hand cut dovetails. It is finished with Liberon. Dimensions are 24.5” x 10” x 7”.
Clock made from maple and walnut sections cut in curved segments on a sled I made for my bandsaw.
FEEDING TIME, was cut from a pattern I found that was hidden in my files. It is 11 x 14 and cut with a 2/0 spiral Pegas blade. It is painted with acrylic paints sprayed with clear gloss.
Baby Cradle pattern was on a scrollsaw web site, and was cut out on 1/4 plywood. Cut with 2/0 spiral blade, painted with spray paint.
Grizzly Bear from a Brad & Hazel Ekland pattern. There are 34 pieces in oak, ash and black walnut. Finish is satin spray on poly. Eyes were finished with gloss for pop.
le cabinet of poplar (cases) and drawer fronts of red oak. Each section was constructed separetly to make carrying up two flights of stairs easier. The four individual sections were then screwed together.
Three African Blackwood table tops. Extremely hard wood with many defects, and gorgeous grain.
First I cut boards to rough size, with straight edges for jointing, then passed them on.
Another group added epoxy with brass shavings, and flattened them.
I then cut to exact sizes, gave a beveled edge, cleaned up the live edges, sanded and sprayed 4 coats of satin urethane with an HVLP sprayer.
Finally the contractor had bases made of brass plated steel.
There is a big dining table, a desk top, and a narrow coffee table.
Two lazy susans of Mesquite and Maple, 17 1/2, with 10 oak bases. Just two glue ups gave this interesting pattern. I used inexpensive 9 round hardware from Rockler
Two scrap wood cutting boards of Maple, some with curly pattern, also Mesquite, Osage Orange, and white oak. I used a cove bit to router recessed handles on each end.
Before and After pictures of the lathe
