2021 January

2021 January
Search
Bob Chenoweth
Bob Chenoweth
Arts & Crafts Coffee table - “Fine Woodworking” intermediate level plan (Taunton Product #011219) by Kevin Rodel, Pownal, Maine. Fumed white oak and satin polyurethane finish with beveled through tenons, grid work stretcher, half lap joints and breadboard ends with ebony inserts.
Gary Rowen
Gary Rowen
I crafted another blanket rack but redesigned it so that all the slats could be cut from one 1x6x8 except for the CNC engraved name plate. It was stained then finished with brushed on lacquer.
Tim Shaunty
Tim Shaunty
This is a patio vertical herb garden made from cedar fence pickets and is painted with FlexSeal to stop leaks
Bob Wink
Bob Wink
Muffler Man made from wood and tailpipe extensions.
Jack Bailie
Jack Bailie
iPad stand made from mahogany and finished with General Finishes Arm-R-Seal.
Mike Hardy
Mike Hardy
Cherry and pecan stacking boxes. 6x6x8 in size. finished with shellac on the inside and Liberon on the outside.
Chris Farquhar
Chris Farquhar
Cell phone holder made from scrap wood, finished with Danish oil and paste wax.
David Janowitz
David Janowitz
This is a church lectern in the shape of their logo. Just under 5’ tall, 40 wide, and 18 deep.
David Janowitz
David Janowitz
A maple internal framework supports 3/4 Walnut veneer plywood, with the curved panels being 3 layers of 1/4 ply, glued together, and the front and back surfaces double thick.
David Janowitz
David Janowitz
Lift top tables. All Water Oak except for the plywood bottoms, with water borne urethane glossy finish.
David Janowitz
David Janowitz
Wooden practice polo horse. All white oak, except the legs, which are just pressure treated wood. No joinery, just lots of countersunk exterior screws, and a few galvanized bolts. I treated it with Olympic Maximum Clear Waterproofing Sealant. All the edges are 1/4 roundover, the head was cut out on a band saw, and that piece passes through the front and attaches in the center piece.
Lon Kelley
Lon Kelley
Bowl is made from poplar and padauk. The method was to cut the bowl in half and put in the angled stripe. Finished with poly and wax.
Sonny Lawson
Sonny Lawson
Chairs as wedding presents. Used templates with a router table to dimension the shaped parts. Chairs were finished with an aniline dye and Arm R Seal. Cushions were purchased online.
Norm Nichols
Norm Nichols
Band saw boxes. Both boxes are aromatic cedar with 5-6 coats of lacquer. Drawers are lined with navy blue Flockit.
« ‹ of 2 › »
Scroll to top