Retrofit of a Craftsman plastic ratchet set tool box.
Salvaged the tray that holds all of the sockets by cutting off the exterior back of the box and reinserted it into the new box.
The upper part of the box will be fitted to hold the various tools shown in the photo.
Made with Wink Wood. Outer frame is 3/4 plywood and the top and bottom panels are 1/4 plywood. Frame assembly was with a Kreg jig, screws and glue.
Built this Pikler triangle for
a one year old. Rungs are
1.25” Birch dowels and
the side is Red Oak
Three intarsia gnomes are made from patterns by Worthington. Woods used are: Aspen, Oak, Purpleheart, Bloodwood, Walnut, Red Cedar, Maple, P Rosa, Blue Pine, Mesquite, and Mahogany. They are finished with Waterlox
Keepsake boxes. Various woods - Walnut, mahogany, bocate, birds eye maple, curly maple, and quarter sawn red oak. Various techniques - box joints, mitered, and splined miter. Most are 4” x 6”. One is 4” x 4”. Finished with General Finishes Arm-R-Seal.
Display case to show items at a consignment shop. It is made of pine fence pickets with a couple of cedar pickets to add a little flair. 48 wide X 18 deep X 48 high.
Desk built by son over the holidays.
Cutting board from the scrap bin. Woods are cherry, maple and walnut, glued up edge grain. About 14×16 x 1-1/4. Inlay was made with a router using a 1/8 bit with a bushing
Polar Bear with Scarf, a Judy Gale design. Wood used: Black Walnut, Cherry, Pine, African Wenge, White Oak & a Mystery Wood from a scrap bin at Rockler.
Added a lower shelf to existing workbench
3/4 thick water oak resting on and screwed to cleats. 4 coats of urethane
I made six Ash salad bowls to go with the Big-Ash bowl, all with a couple of coats of Tung oil. 7 7/8x2
Osage Orange and Maple cutting board. Handle grips routed in each end on top and bottom. Finished with plain mineral oil. 14 x 16 x 3/4.
Big Wheels: These were made from plugs cut by plumbers in a nearby new house.
Organizer to hold Ziploc storage bags, etc. Constructed of 1/2 and 1/4 Baltic birch, with the inserts joined by a wine-box style mechanical joint.
