Lid opens toward the sides and hinged on brass pins. The top ends are not rounded on the bottom sides. This keeps the lid from opening all the way. Lined with red felt.
It is all cherry with a drawer and an inside tray.
All cherry with red felt lining.
It is all cherry with a drawer and an inside tray.
All cherry with red felt lining.
Table saw outfeed cabinet made out of 3/4 baltic birch plywood.
It's finished with Watco clear danish oil and polyurethane/wax on the top .
Bathroom doors as part of a remodel project
Egg and dart picture frame molding used around mirrors.
layered bowls from maple, walnut and mahogany.
The problem was that someone mounted them in the lathe crookedly, and they almost beat me to death trying to get a tool into them. They had at least an inch of runout.
Each Wolf silhouette is 12 tall; made from 1/2 thick Pine; painted in White Gloss and Black Gloss paint.
My Tex-American flag to hang outside by the from door. My first attempt at relief carving. The star block is basswood. I tried carving pine and poplar without much success.
”Captivating the Past” - It is cut out of pecan slab. It is actually 4 different patterns added together. It is painted with acrylic paints.
A church wellhead cover. It is framed from treated 2x4 and covered in Hardi-Plank and will not blow away in a hurricane.
Matchbox car garage. It is 36 W x 34 H x 14 D. Is it made from 1/4 Baltic birch plywood.
This hot rod truck is based on the funny car Dodge Lil' Red Wagon. Mine is made from poplar with various woods for highlights.
The plans are from Toymaking Plans.
A Dollhouse from Wink-Wood. This dollhouse is from Toymaking Plans.
A Dollhouse from Wink-Wood. This dollhouse is from Toymaking Plans.
Cherry and ash small wall cabinet. 23 x 11.5 x 4.5 with hand cut through dovetails and tenons. The back is ship lapped ash painted with black milk paint, and everything else including the drawers is cherry. T
The basic design is from Mike Pekovich's book, The How and Why of Woodworking.
It is finished with four coats of Waterlox
Two baseball bats made from Water Oak
The finished bar is two ash boards plus the walnut banister, and is 20 x 1 1/2 x 11'.
Finally finished off with 5 coats of Minwax Water Based Spar Urethane, gloss, applying very fast with a painting pad.
