Balloon scene intarsia of 48 woods.
Chaos pattern end grain cutting boards with cherry, maple, mahogany, purpleheart and walnut. Finish is General Finishes Wood Bowl Finish
Scrollsaw art/basket of pine and maple.
Truck crane of maple and walnut.
Jeep is 11”x16” cut from wink wood it is a Charles Dearing pattern. Painted with acrylic paint. Has black velour paper for backer. Sprayed with clear gloss.
Cook book stand of cedar.
Bowl made from the leftovers from a chaotic end-grained cutting board. I used a bowl bit on the router to clean up the interior after I hogged out the bulk of the inside with Forstner bits. Finshed with spray lacquer.
Segmented turnings of two vases of various woods.
Jigsaw puzzle on the scroll saw
Made some Christmas ornaments inspired from a Steve Goode design. I used walnut, ash, alder, and several different colors of poplar. Finished with WB semi-gloss poly.
Rolling pins are 18-21, one of Osage orange, and the other two of unusual spalted curly maple.
Smaller rolling pins are about 9, and are of Osage, Crepe Myrtle, and Ash.
Table from salvaged walnut stair balusters and a live edge walnut board. Tung oil finish.
The legs were already turned, and warped, so I had to mostly sand and cut the tenons by hand.
I made mortise and wedged tenons to attach the legs.
Set of 6 salad bowls and one larger serving bowl, Ash, 6 1/2 and 13,