This poor little bowl got cut in half twice. Its mahogany and poplar with spray poly.
The wine bottle topper is Poplar and Cherry with some red paint where it was carve on the CNC. Will finish with clear poly.
Charcuterie Boards. The rack on right is all done and the left rack is in sanding stages. The woods are Walnut, Maple, Cherry, Purpleheart and Paudak.
This is my Grand Piano. This is a John Nelson pattern. I made this out of 1/4 corian except for the dowel for feet and the hinges. It stands 6 high x 9 long.
meaning for them. This intarsia style frame (for 8'x10' photo) was comprised of 102 pieces of aspen, bubinga, mahogany (dyed red), and yellow heart.
Rugged cross made from 6x6 reclaimed timber. Cross is 6' tall and left natural and unfinished
Resurrection cross inspired by Dennehey Designs made from walnut and maple, finished with spray lacquer.
Storage bench from an Ana White design. Made primarily from cedar
Cheese cutter kits from woodcraft and exotic wood coasters. I glued up some scraps from larger projects. I sanded them to 220 and finished with mineral oil/beeswax finish
The small bowls are pecan, large bowl is Hackberry, top is mahogany, walnut and maple scraps. The lidded boxes are oak and beech??,
Conductor podium commission. White oak box and railing with a cherry and maple cross. The box is 40x40x8 and the top of the railing is 36 above the frame. The top rail and edge of the frame are curved, reflecting the curved railing of the sanctuary of the church.
Intarsia project White Tailed Deer. A Judy Robert's design. Walnut; Black Walnut; Basswood; White Oak; Pine; Ash & Ebony woods.
Mahogany tree cross section slice. I finished levelling, sanded, and applied 6 coats of urethane. It’s about 5' long.
Mahogany bowl 13x4 finished with polyurethane